Error Codes

Below is the list of the possible error codes:

0x00000 – Operation completed successfully;

0x10001 – Partition parameters exceed the disk limits;

0x10002 – Crosslinked partitions;

0x10003 – Not enough space available (unable to create a partition of the requested size);

0x10004 – No free block is available to create a primary partition;

0x10005 – Partition is not valid;

0x10007 – The extended partition is not found;

0x1000a – The extended partition already exists;

0x10010 – FDISK structure is corrupted;

0x10011 – Invalid drive specification;

0x10012 – No logical disk defined for this partition;

0x10013 – Unknown partition type (unsupported file system);

0x10014 – Object is not found;

0x10018 – File system error – file localization error (i.e. because of the crosslinked files). Run CHKDSK to fix it;

0x1001a – Not enough memory;

0x1001b – File I/O error. It can occur when the restart data is saved/restored;

0x1001c – Partition parameters exceed the available limits;

0x10021 – Directory is invalid or not exists;

0x10022 – Internal error;

0x10023 – Failed to create/open file;

0x10025 – Invalid archive file;

0x10026 – Not for the DEMO-version;

0x10028 – An unexpected error has occurred during file execution;

0x1002c – Invalid volume label (in partition deletion or backup operation);

0x1002e – Invalid script parameters;

0x1002f – Forbidden operation;

0x10031 – Invalid size of the partition image;

0x10036 – Invalid password for decryption;

0x10038 – Trial period expired;

0x1003f – File/directory size is 4 GB;

0x10041 – Invalid codepage file;

0x10042 – Incompatible version components;

0x1004b – Failed to read the dynamic disk info;

0x1004c – Failed to mount partition;

0x1004d – Failed to unmount partition;

0x1004e – Login authentication failed;

0x1004f – Cannot access the file because it is mounted or being used by another process;

0x10050 – No restart-demanding operations are available for the locked partitions on physical disks;

0x10051 – Specified sector size is not supported;

0x10052 – No supported authentication method found;

0x10053 – Public key is not allowed for this user;

0x10054 – Unable to initialize private key from file;

0x10055 – Password authentication failed;

0x10056 – Specified cluster size is not supported;

0x10057 – Please select main archive file to open;

0x10058 – Logon failure: unknown user name or bad password;

0x10059 – No more connections can be made to remote computer;

0x1005a – Access is denied;

0x1005b – None of the supported devices has been found. Please connect an appropriate device and restart the program;

0x1005c – Cannot perform the operation cause selected disk is not SSD;

0x1005d – Cannot perform the operation cause selected SSD disk is frozen;

0x1005e – Cannot perform the operation cause selected SSD disk is locked;

0x1005f – Cannot delete the file or folder;

0x10060 – Invalid function parameter;

0x10061 – Could not connect to host;

0x10062 – Unable to write file;

0x10063 – Unable to read file;

0x10090 – Disk I/O error;

0x10091 – Operation is cancelled by the user;

0x10092 – This operation is not supported;

0x10093 – Invalid operation code;

0x10094 – Bio library has not been initialized;

0x10095 – Operation failed;

0x10096 – The requested URL was not found on this server;

0x10098 – Session internal error has occured;

0x100a1 – Cannot lock source partition;

0x100a2 – Cannot lock target partition;

0x100a3 – PM is unable to complete the operation because Windows has performed a write to the source disk. Please make sure that all open programs are closed and press “Retry” to let PM to restart the operation. If the problem persists, use the MS-DOS mode version of PM;

0x100a4 – This operation is not implemented;

0x100a5 – It is not possible to perform the operation because the journal is not empty. Run CHKDSK to replay the journal;

0x11000 – Stub manager already exists;

0x11001 – Stub library has not been initialized;

0x11002 – Previous virtual stub manager exists;

0x11003 – Previous virtual stub manager does not exist;

0x11004 – Next Stub virtual manager exists;

0x11005 – Next Stub virtual manager does not exist;

0x11006 – Object is not valid;

0x11007 – Operation is not associated with the StubMan specified;

0x11008 – Disk is not found;

0x11009 – Disk is not valid;

0x1100b – System reboot is required to complete the operation;

0x1100c – Search is completed;

0x1100d – Can’t undelete primary partition inside extended partition;

0x1100e – Virtual container data block checksum is invalid;

0x1100f – Bad computer specified;

0x11010 – Device I/O error;

0x11011 – Access violation at memory address. The service has encounted a problem. We are sorry for the inconvenience;

0x11012 – Invalid buffer;

0x11013 – Device or resource is busy;

0x11014 – No media;

0x11015 – Illegal server state;

0x11016 – Partial file or operation;

0x11017 – File too long;

0x11018 – Undefined error;

0x11019 – The archive of Windows is not found! You should backup the system before burning;

0x1101a – Parameter memory is too small;

0x1101b – Partition is not found;

0x1101c – The following CD-ROM does not exist;

0x1101d – Unable to eject CD-ROM;

0x1101e – Information about restart is not found;

0x1101f – You should re-initialize the UFSD subsystem;

0x11021 – Invalid header signature in the restart file;

0x11022 – Invalid operation signature in the restart file;

0x11023 – Restart operation is not found;

0x11024 – Invalid signature in the restart location structure;

0x11026 – There has been an error during restart;

0x11027 – This image cannot be restored to the current selection;

0x11028 – Engine is already running;

0x11029 – Cannot create the process;

0x1102a – Process returned an error, see GetLastError();

0x1102b – The cluster size is too small to change the file system. Try to increase size of the cluster before converting the file system;

0x1102c – There is no possibility to restore disk or partition from itself;

0x1102d – There is a crosslink with the Backup Capsule;

0x1102e – There is no possibility to back up disk or partition to itself;

0x1102f – Target disk drive is not found;

0x11030 – Partitions structure differs from the archive;

0x11031 – Cannot modify this dynamic group. Please make sure that all dynamic disks are connected;

0x11032 – Cannot perform a task over virtual partition or volume;

0x11033 – Cannot retain selected disk;

0x11034 – There is no possibility to save dump of the file system to itself;

0x11035 – Data block information was not found in index file;

0x11036 – Incorrect passphrase for decrypt;

0x11037 – Incompatible index file version;

0x11038 – Partitions structure of the target hard disk does not correspond to that of the source hard disk;

0x11039 – Cannot get CDP bitmap ’cause CDP internal handles were not given;

0x1103a – Cannot get CDP bitmap ’cause selected task does not exist. New CDP task was queued;

0x1103b – Cannot create CDP increment ’cause given bitmap size is less than partition’s bitmap;

0x1103c – Cannot convert CDP bitmap ’cause it’s bit size is not multiple of bit size of partition’s bitmap;

0x1103d – Internal CDP error;

0x1103e – CDP specific error: Please see logs for more information;

0x1103f – Hotpat service is not available;

0x11040 – Hotpat service internal error has occured. Please see logs for more information;

0x11041 – Cannot modify this dynamic group. Duplicate FDISK structure exists;

0x11042 – Cannot destroy the GPT protective partition. This will turn your Hybrid GPT disk to GPT and make your system unbootable;

0x11043 – Cannot restore over Backup Capsule;

0x11044 – Cannot claim disk. Try to close apps probably required exclusive disk access;

0x11045 – The selected network share does not exist;

0x11047 – The selected path is not available, please check and retry;

0x11048 – The selected resource does not exist or not available at the moment;

0x11049 – The scheduled task is not found;

0x1104a – Path is not valid;

0x1104b – Directory is not empty;

0x1104c – Directory is read only;

0x1104d – String identifier has wrong format;

0x1104e – Source object was not processed;

0x11100 – Unable to open UIM-component;

0x11101 – Unknown image-format or failed to open the specified file;

0x11102 – UIM failed to complete the specified operation;

0x11103 – Cannot defragment the System Windows partition. Please use Rescue Disk to defragment it;

0x11104 – Boot Manager already exists;

0x11105 – Boot Manager does not exist;

0x11106 – DISM specific error: Please see the dism.log for more information;

0x11107 – DISM driver path cannot contain the ‘=’ character;

0x11108 – Hyper-V Machine doesn’t support Production checkpoints;

0x11111 – VSS specific error: The VSS provider has encountered an internal run-time error;

0x11112 – VSS specific error: Please see the system and application event logs for more information;

0x11113 – Impossible to initialize VSS for processed volume;

0x11114 – Cannot create/release rwblock, because of old one is using;

0x11115 – There is not enough disk space;

0x11116 – The disk is offline;

0x11117 – Could not find suitable partition for installing system recovery environment;

0x11119 – Cannot install Windows PE environment on bootable or system partition;

0x1111a – Cannot install system recovery environment on dynamic disk;

0x1111b – Cannot install system recovery environment on disk with non-unique identification;

0x1111c – Cannot install system recovery environment on disk without active partition;

0x1111d – Driver not found in repository;

0x1111e – Hot processing is not available;

0x1111f – Insufficient space for installing Boot Manager;

0x11120 – The disk is not initialized;

0x21121 – The disk has a signature collision with another disk;

0x11122 – Volumes are incompatible for this operation;

0x11123 – VSS specific error: The VSS provider cannot perform the operation because there is not enough disk space;

0x11124 – Copy disk test failed – facet structure information incompatible;

0x11125 – Operation denied. Random data access is required but not provided;

0x11126 – Cannot get volume UFSD;

0x11127 – FAT partition is not allowed as destination for backup;

0x11128 – There is no possibility to change volume’s file system with Windows OS installed;

0x11129 – You’re only allowed to change file system of a volume that accomodates Windows OS between FAT and NTFS file systems;

0x1112a – There is no possibility to change file system of the volume with Boot Configuration Data;

0x1112b – There is no possibility to copy virtual disk or partition to itself;

0x1112c – There is no possibility to copy virtual container file to itself;

0x1112d – Cannot proceed the operation cause no one partition or disk have been passed on;

0x1112e – Disk is not valid exclude object;

0x1112f – Archive name is not valid;

0x11130 – Selected disk does not support this operation;

0x11131 – Selected partition does not support this operation;

0x11132 – Extended extended partition is not valid object for the operation;

0x11133 – Selected disk is too small for the operation;

0x11134 – Cannot create increment to selected archive;

0x11135 – Virtual container vendor is invalid;

0x11136 – Cannot open base archive;

0x11137 – Cannot operate with pinned archive;

0x11138 – Cannot merge selected archive;

0x11139 – The program allowes to delete only the latest increment in a backup chain;

0x1113a – You’ve already created increment to the selected virtual archive. The program allowes to create increment only to the initial archive or to the latest increment in a backup chain;

0x1113b – This file is not a virtual disk container;

0x1113c – The dynamic disk has a metadata collision with another disk. Please detach original disk to avoid data loss;

0x1113d – The disk size exceeds maximum supported size limit of the selected container type;

0x1113e – Selected object is not valid for file-level operation;

0x1113f – Selected virtual container does not support this operation;

0x11140 – Failed to obtain information about Hyper-V virtual machine;

0x11141 – Hyper-V specific error: Hyper-V Machine state is bad;

0x11142 – A name cannot contain any of the following characters: \ / : * ? \” < > |;

0x11143 – VSS specific error: Hyper-V writer status is bad;

0x11144 – HotBackup technology cannot be used for operations with resize proportionally;

0x11145 – Cannot create increment to the mounted archive;

0x11146 – Cannot create increment to the connected archive;

0x11147 – Cannot operate with mounted archive;

0x11148 – Cannot operate with connected archive;

0x11149 – Selected archive is not valid for this operation;

0x1114a – Trim command could not be performed;

0x1114b – Cannot initialize required service;

0x1114c – Disk layout contains errors;

0x1114d – Some disk layout errors could not be fixed;

0x1114e – Duplicate encryption is not possible if target is virtual container;

0x1114f – Hyper-V Machine configuration file format is unknown;

0x11150 – Cannot transfer Hyper-V Machine to consistent state. Please try again the operation later;

0x11151 – Simultaneously copy and resize is required but not possible;

0x11152 – Disk read/write performance could not be calculated because of no suitable disk area found;

0x11153 – Cannot operate with deduped archive;

0x11154 – Deduplication block is not found in base file;

0x11155 – Cannot save deduplication block data;

0x11156 – Cannot load deduplication block data;

0x11157 – Cannot export the selected archive;

0x11158 – HotBackup technology cannot be used for file-level operations;

0x11159 – Bitlocked Drive Encryption operation failed;

0x1115a – PGP wde version is not supported;

0x1115b – PGP wde current configuration is not supported;

0x1115c – PGP wde current configuration is corrupted;

0x1115d – Bitlocker current configuration is not supported;

0x1115e – Bitlocker current configuration is corrupted;

0x1115f – VSS specific error: The maximum number of volumes for this operation has been reached;

0x11160 – Cannot access deduplication storage location;

0x11161 – Task Scheduler is not available;

0x11162 – Task Scheduler error has occured;

0x11163 – Jobs service is not available;

0x11164 – Cannot open/create jobs database;

0x11165 – Cannot perform the operation due to database error;

0x11166 – Jobs database is not supported of the current version of program;

0x11167 – Job data is not supported of the current version of program;

0x11168 – Item is not found in database;

0x11169 – Job operation code doesn’t match to database;  

0x1116a – Cannot perform the operation cause the job is running;

0x1116b – Backup set data is not found;

0x1116c – Base archive data is not found in database;

0x1116d – Parent archive is not found in database;

0x1116e – Archive data is not found in database;

0x1116f – Operation is failed. Possible it has terminated unexpectedly;

0x11170 – Cannot delete item. Possible it’s in use;

0x11171 – Backup set data is already imported;

0x11172 – Job item is already exists in database;

0x11173 – Cannot perform the operation due to database is locked;

0x11174 – Cannot perform the operation cause the job is already done;

0x11175 – Cannot perform the operation cause not enough permission to access database;

0x12000 – Failed to modify the protected partition;

0x12001 – No restart.log found;

0x12002 – Operation is invalid for this object.

0x12003 – Operation has been cancelled;

0x12004 – Path is invalid;

0x12005 – Requested action cannot be done from this CD. Please insert the main disc;

0x12006 – Not enough free space on the temp-drive for HotBackup. Operation aborted;

0x12007 – Local context error. Please see logs for more information;

0x12008 – Failed to make a bootable CD with the specified options;

0x12009 – This version cannot be rebooted;

0x1200a – HotBackup service is not available;

0x1200b – Unable to open HotBackup service;

0x1200c – I/O error during HotBackup;

0x1200d – HotBackup session is already in progress;

0x1200e – Internal error during HotBackup;

0x1200f – Dynamic disk cannot be used as target during the disk copy operation;

0x12010 – Wrong format of the restart log file;

0x12011 – File “disk.pbf” or “system.pbf” is not found on the CD;

0x12012 – Backup Capsule has not been found on any hard disk;

0x12013 – Can create a mask for the wipe operation;

0x12014 – Windows Server is not supported;

0x12015 – Operation failed because volume was locked by another application;

0x12016 – VSS: Cannot read volume data;

0x12017 – Invalid registry hive;

0x12018 – Cannot restore from network share;

0x12019 – Restart is needed to complete operations in the PSR mode (reboot to DOS or Linux);

0x1201b – Virtual image is already connected;

0x1201c – Unknown virtual image type;

0x1201d – Bad virtual image size;

0x1201e – Cannot back up to network share;

0x1201f – Parent file is already open;

0x12020 – Cannot open parent disk file;

0x12021 – Partition is too big for the selected file system;

0x12022 – Device limit overrun;

0x12023 – Bad signature of the archive index file;

0x12024 – Wrong backup index file;

0x12025 – Incorrect choice archive;

0x12026 – This file is not archive file;

0x12027 – Cannot update index file. Insufficient block space;

0x12028 – Cannot set reference GUID;

0x12029 – Is not allowed to increment this archive;

0x1202a – Cannot delete partition protected by bitlocker. Please remove it first manually;

0x1202b – Bitlocker-encrypted partition is not successfully unlocked;

0x1202c – Restoring over encrypted partition is not allowed. Please delete target partition first;

0x1202d – Cannot utilize the LiveFS service to accomplish the operation;

0x1202e – The operation cannot be performed as an other operation (i.e backup, copy, etc.) using this volume is currently in progress;

0x1202f – Cannot perform the operation cause archive is in use;

0x12030 – Cannot restore selected archive;

0x12031 – Source object given for backup is not found;

0x12032 – Write to disk with enabled SIP is denied;

0x12033 – Failed to import Virtual Machine;

0x12034 – Cannot restore Windows system partition from CD/DVD/BD media in native mode. Please use Windows PE recovery media to complete the operation;

0x12035 – SDD TRIM for partition with unaligned start or cluster size is unsafe and forbidden with out verify. Please use other wipe options;

0x12036 – The specified resize value is too small and therefore is not possible. Please specify a larger resize value;

0x12037 – Hyper-V specific error: Please see logs for more information;

0x12038 – Could not connect to Hyper-V service;

0x12039 – Source VM has disks layout changes. Enable Full Copy Failover in Migration settings to re-copy machine;

0x1203a – Source VM has disks layout changes. Please run interim synchronization to avoid long source VM downtime;

0x1203b – Selected archive is not supported of the current version of the Hypervisor;

0x1203c – Selected archive cannot be restored to original location;

0x1203d – Failed to restore archive cause original Virtual Machine is not powered off;

0x1203e – Selected archive cannot be restored to original location using RCT service. Please restore VM with RCT mode turned off;

0x1203f – Some virtual disks were removed after recovery point was created. Please restore VM with RCT mode turned off;

0x12040 – Some virtual disks were shrinked after recovery point was created. Please delete them or restore VM to new location;

0x12041 – There is no change tracking data available associated with the specified change tracking identifier;

0x12042 – Change tracking is disabled for the specified virtual hard disk, so no change tracking information is available;

0x12050 – LSL specific error: LSL Service operation failed. Please see the logs for more information;

0x12051 – LSL Service is not inited;

0x12052 – Some recipient has wrong format;

0x12053 – Your recovery media validity period has been expired

0x12054 – Mail sender has wrong format;

0x12056 – Server HTTP error;

0x12056 – Repclient specific error: Service operation failed. Please see the logs for more information;

0x12057 – Server bad response;

0x12090 – ESX specific error: Open esx rwblock;

0x12091 – ESX specific error: Get disk information failed;

0x12092 – ESX specific error: Fail on getting transport mode;

0x12093 – ESX specific error: Fail on ‘Init’ operation;

0x12094 – ESX specific error: Fail on ‘Connect’ operation;

0x12095 – ESX specific error: Fail on ‘Disconnect’ operation;

0x12096 – ESX specific error: Fail on ‘Read’ operation;

0x12097 – ESX specific error: Fail on ‘Write’ operation;

0x12098 – ESX specific error: Fail on ‘Close’ operation;

0x12099 – ESX specific error: Fail on ‘End access’ operation;

0x1209a – ESX specific error: Fail on ‘Prepare for access’ operation;

0x1209b – ESX specific error: Fail on ‘Cleanup’ operation;

0x1209c – ESX specific error: Unable to load vddk library;

0x1209d – ESX specific error: Unable to parse physical hotadded disk name;

0x12101 – VIM specific error: Please see logs for more information;

0x12102 – VIM specific error: Operation is failed;

0x12103 – VIM specific error: Not connected;

0x12104 – VIM specific error: Connection cancelled;

0x12105 – VIM specific error: No required license feature;

0x12106 – VIM specific error: No required privilege;

0x12107 – VIM specific error: No required capability;

0x12108 – VIM specific error: No virtual machine;

0x12109 – VIM specific error: No virtual disk;

0x1210a – VIM specific error: No snapshot;

0x1210b – VIM specific error: Fault tolerance not supported;

0x1210c – VIM specific error: Source virtual machine is powered on;

0x1210d – VIM specific error: Source virtual machine shutdown is timed out;

0x1210e – VIM specific error: Failed to contact VMware Tools running inside the virtual machine;